🌟 ASA Glass Fiber Filament 1.75mm – Profissional Lab
Profissional Lab's ASA-GF 1.75mm filament is a glass-fibre-reinforced ASA designed for the most demanding applications — where UV resistance, dimensional stability, structural rigidity and the ability to withstand harsh weather conditions are critical requirements. Compared to standard ASA, the glass fibre reinforcement adds significant rigidity, reduces thermal expansion and improves dimensional stability, while retaining all the advantages of ASA: superior UV resistance, outdoor durability, chemical resistance and a high-quality matte finish. Ideal for technical and functional parts intended for prolonged outdoor use.
🔹 Why choose Profissional Lab ASA-GF Filament?
- Superior UV and weather resistance — retains its mechanical and visual properties after prolonged exposure to sunlight and the elements.
- Glass fibre reinforcement — much greater rigidity and dimensional stability than standard ASA, with reduced thermal expansion.
- High-quality matte finish — fewer visible layer lines and a professional appearance straight off the printer.
- High impact and temperature resistance — suitable for technical components in demanding environments.
- Good chemical resistance — withstands exposure to oils, fuels and common chemicals.
- Can be post-processed with acetone vapour — for a smooth, glossy finish when required.
- Compatible with 1.75 mm FDM 3D printers such as Bambu Lab, Creality, Prusa, Anycubic, Elegoo, Artillery, Flashforge and FLSUN.
- Diameter: 1.75 mm ± 0.03 mm | Net weight: 1 kg
✅ Advantages of ASA-GF 1.75mm
- Superior to standard ASA in rigidity, dimensional stability and mechanical strength.
- Ideal for long-lasting outdoor parts — resistant to UV, moisture and temperature fluctuations.
- Professional matte finish with no post-processing required.
- Suitable for technical, industrial and engineering components.
⚙️ Recommended Printing Parameters
- Extrusion temperature: 250 – 270 °C
- Heated bed: 90 – 110 °C | Surface: PEI or glass with adhesive
- Fan: off or set to minimum (0 – 20%)
- Speed: 30 – 60 mm/s
- Recommended: enclosed chamber to reduce warping and improve layer adhesion
💡 Recommendations
- A hardened steel nozzle is essential — glass fibre is abrasive and quickly wears down brass nozzles.
- An enclosed chamber is strongly recommended — it significantly improves layer adhesion and reduces warping.
- Store in a dry place — ASA is hygroscopic. If it absorbs moisture, dry at 60–70°C for 5 to 8 hours before printing.
- For better bed adhesion, use 3DLAC, glue stick or a heated PEI surface.
Material tested and approved by Smart3DPT ✅
💡 If you think the prices are high, check our Patreon where we offer exclusive discounts of up to 22% on selected brands for patrons!
