🌟 Bambu Lab X2D – Dual-Nozzle FDM 3D Printer with Enclosed Chamber
The Bambu Lab X2D is a new enclosed FDM 3D printer with an integrated dual-nozzle system, with no AMS required for basic multi-material printing. The primary nozzle prints the model, while the auxiliary nozzle handles supports using a dedicated material, allowing clean and effortless removal even on complex geometries.
With a PMSM servo motor, Dynamic Flow Calibration, Active Vibration Compensation, 31 sensors, AI camera and three-stage filtration, the X2D delivers professional surface quality with quiet and safe printing for use in occupied indoor spaces.
🔹 What makes the Bambu Lab X2D stand out?
-
Dual-nozzle system with gear-and-trigger mechanism — nozzle switching without additional weight or an extra motor, tested for more than 1,000,000 durability cycles.
-
Dedicated support material — the auxiliary nozzle uses its own filament for supports, allowing clean removal on steep overhangs, folds and internal channels.
-
High-precision PMSM servo motor on the primary extruder — 20 kHz sampling for real-time pressure control, smoother surfaces and consistent finishes print after print.
-
Dynamic Flow Calibration — a non-linear model that automatically compensates for nozzle wear, residue and filament moisture, with no manual intervention required.
-
Active Vibration Compensation — eliminates ringing and ghosting in real time for sharp edges and precise details at any printing speed.
-
Dual cooling with two side air inlets — constant fresh-air circulation to stabilise each layer, improve overhangs and produce cleaner bridges.
-
AI Liveview Camera + Toolhead Camera — automatic pre-print verification and real-time monitoring for spaghetti failures, nozzle build-up and purge chute blockages.
-
31 sensors — comprehensive monitoring of the filament path, thermal control and machine safety.
-
Three-stage filtration — G3 pre-filter + H12 HEPA + coconut-shell activated carbon.
-
UL 2904 certification for indoor air quality — when using Bambu PLA Basic and PETG Basic.
-
Tool-free nozzle replacement — completed in seconds, even for first-time users.
-
Noise level below 50 dB — Active Motor Noise Cancellation for quiet overnight printing.
-
Regular firmware updates — new features delivered directly to the machine, on average every 3 months.
✅ Advantages of the Bambu Lab X2D
-
Clean and effortless support removal thanks to dedicated support material in the auxiliary nozzle.
-
Professional surface quality with 20 kHz servo pressure control.
-
Quiet operation and certified for occupied indoor spaces, including living rooms, offices and studios.
-
Compatible with AMS 2 Pro and AMS HT for multi-colour printing. More than 2 AMS units require the FAZ013-N 4-in-1 PTFE Adapter.
-
Compatible with Bambu Studio and third-party slicers.
⚙️ Technical Specifications
-
Technology: FDM — enclosed chamber with dual nozzle
-
Build volume: 256 × 256 × 260 mm³ (primary nozzle) | 235.5 × 256 × 256 mm³ (auxiliary/dual nozzle)
-
Maximum nozzle temperature: 300°C
-
Included nozzle: 0.4 mm (hardened steel) | Compatible: 0.2 / 0.4 / 0.6 / 0.8 mm
-
Filament diameter: 1.75 mm
-
Primary extruder: PMSM servo motor | Auxiliary extruder: Stepper motor
-
Gears: Hardened steel (both extruders)
-
Integrated filament cutter
-
Voltage: 200–240 V
-
Dimensions: 392 × 406 × 478 mm | Net weight: 16.25 kg
Smart3DPT
Material tested and approved by Smart3DPT ✅
💡 If you find the prices too high, check our Patreon, where we offer discounts of up to 22% on selected brands, exclusively for patrons!
