🌟 Bambu Lab P1S – Enclosed 3D Printer
The Bambu Lab P1S is an enclosed FDM 3D printer that's ready to print less than 15 minutes after unboxing. With a fully enclosed plastic and glass chamber, a closed-loop multi-fan cooling system, an activated carbon filter and support for technical materials such as ABS and ASA, the P1S is the ideal choice for makers who want speed, quality and material versatility in a reliable, compact platform.
🔹 What sets the Bambu Lab P1S apart?
- Fully enclosed chamber — plastic and glass construction that stabilises the internal temperature, essential for printing materials prone to warping, such as ABS and ASA.
- Closed-loop cooling system — auxiliary part-cooling fan, chamber temperature regulation fan and control board fan, all operating under closed-loop control for maximum stability.
- Activated carbon filter — effectively reduces odours and particles released when printing with technical filaments.
- Fully automatic calibration — bed levelling and vibration compensation are managed by the printer without manual intervention.
- Vibration compensation (XY) and Pressure Advance — high-speed printing without compromising surface quality.
- All-metal hot end with a maximum temperature of 300°C — supports PLA, PETG, TPU, PVA, PET, ABS and ASA, and can print PA and PC.
- Integrated 1280×720 camera — remote monitoring and timelapse recording.
- AMS compatible — multicolour printing with up to 16 colours when connecting 4 AMS units.
✅ Advantages
- Ready to print in about 15 minutes after unboxing.
- Maximum acceleration of 20,000 mm/s² — capable of printing a Benchy in 18 minutes.
- Supports multiple build plate surfaces: Textured PEI, Cool Plate, Engineering Plate and High Temperature Plate.
- Filament runout sensor included.
- Power loss recovery.
- Compatible with Bambu Studio and Bambu Handy.
⚙️ Technical Specifications
- Technology: FDM — enclosed chamber (plastic and glass)
- Build volume: 256 × 256 × 256 mm
- Hot end: All-metal | Maximum temperature: 300°C
- Included nozzle: 0.4 mm (stainless steel) | Optional: 0.2 / 0.6 / 0.8 mm
- Maximum bed temperature: 100°C
- Maximum speed: 500 mm/s | Maximum acceleration: 20,000 mm/s²
- Camera: 1280 × 720 with timelapse support
- Ideal filaments: PLA, PETG, TPU, PVA, PET, ABS, ASA
- Supported filaments: PA, PC
- Power: 1000W @ 220V / 350W @ 110V
- Dimensions: 389 × 389 × 458 mm | Net weight: 12.95 kg
💡 Notes and Recommendations
- This version does not include an AMS. To add multicolour printing, you must purchase an AMS separately, along with the corresponding upgrade kit (buffer, bus cable, PTFE tubes and couplers).
- Not recommended for printing carbon- or glass-fibre-reinforced filaments directly without upgrading the extruder and hot end.
- Once the packaging has been opened and the product used, returns are not accepted.
Material tested and approved by Smart3DPT ✅
💡 If you think the prices are high, check out our Patreon, where we offer exclusive discounts of up to 22% on selected brands for patrons!
